Engineering plastics manufacturers: performance comparison of Engineering Plastics: PA, PA plate, PA rod, PA plate and rod
English Name: polyamide, abbreviation: nylon or Pa. There are different types of polyamides, including PA6, PA66, PA46, PA11 and PA12. Due to the different types, the physical properties are different, which is mainly due to the different composition and structure of molecular chain.
PA6 natural color (white) / Black: PA6 has good mechanical strength, stiffness, toughness, mechanical damping and wear resistance. With good electrical insulation and chemical corrosion resistance, PA6 has become a common material for mechanical structure parts.
PA66 natural color (milk yellow) / Black: compared with PA6, PA66 has higher mechanical strength, stiffness, heat resistance and wear resistance. It also has higher creep strength, but lower impact strength and mechanical damping capacity.
Pa66-gf30 Black: this material is reinforced by 30% glass fiber and belongs to heat stable nylon material. It has higher strength, stiffness, creep resistance, dimensional stability and outstanding wear resistance. In addition, its long-term working temperature increases to 120 ℃.
Pa66-mos2 Gray Black: compared with PA66, the rigidity, hardness and dimensional stability of pa66-mos2 are improved, but the impact strength is decreased. MoS2 improves the crystal structure of the material, and improves the bearing capacity and wear resistance of the material.
PA46 brown red: compared with ordinary nylon, PA46 has advantages in heat resistance, mechanical strength under high temperature, heat aging resistance and wear resistance. Its long-term use temperature can reach 155 ℃.
Excellent mechanical strength, stiffness and hardness;
High impact strength, high function load resistance;
Low friction coefficient and good wear resistance;
Good fatigue strength;
Good resistance to high energy radiation (gamma - and X-ray);
Resistant to weak acids and bases, as well as all commercial organic solvents;
Good machining performance;
Non toxic and harmless, can contact with food.
The water absorption rate of PA6 is up to 9%;
Physical stability and dimensional stability are affected by temperature and temperature;
Nylon is widely used in wear-resistant bearing, shaft sleeve, gear, wear-resistant slider, block, chain track, seal ring, valve plate, etc.
General stock specifications:
Plate: (0.3-1.5) x 1000 x 10m; (1-100) x 1000 x 2000mm;
Round bar: (5-310) x 1000mm;
Round tube: (25-310) x (10-130) x 1000mm
Color: white, black. Other colors can be customized.
Modified products: glass fiber reinforced, MoS2 reinforced, nano reinforced.
Telephone ： 0086-13902964425
website ： quietlightcandles.net
Address ：No. 508, Huangpu River North Road, Zhoushi Town, Kunshan City, Suzhou City, Jiangsu Province